Corrugated Metal Roofing

Corrugated metal roofing is the entry point to the metal roofing family — an exposed-fastener panel system that delivers most of the lifespan of premium metal at a fraction of the price of standing seam. If you've heard it called a 'tin roof', 'ag panel', 'ribbed steel', or '9-36 panel', those are all describing the same category: wide-format pre-finished steel sheets fastened directly through the panel face into the substrate below. It is the workhorse of Alberta roofing — the panel you see on shops, garages, barns, cabins, and a growing number of budget-conscious homes across the Edmonton region.

The appeal is simple economics. Because corrugated panels are wide (a single sheet covers three feet of roof), come in long runs cut to length, and install with fewer specialized steps than a concealed-fastener system, the installed cost lands well below standing seam while still giving you a 40-to-50-year steel roof. For a detached garage, an acreage shop, a cabin at the lake, or a starter home where the budget won't stretch to standing seam, corrugated is the honest, durable answer — a real metal roof, not another 15-year round of asphalt.

The trade-off versus standing seam is the fasteners. Corrugated panels are screwed through the face with gasketed, colour-matched screws rather than hidden clips. Those screws are what makes the system affordable, but they are also the one maintenance item on the roof: the neoprene washers that seal each screw have a service life, and on a 40-year roof they may need re-torquing or replacement once along the way. We install with premium long-life gasketed fasteners and the correct screw pattern for Edmonton's wind and snow load, which is the single biggest factor in how long an exposed-fastener roof stays weather-tight. Done properly, it is a roof you inspect occasionally, not one you worry about.

Corrugated is also the natural choice for outbuildings and mixed residential-agricultural properties, which is why it overlaps with our agricultural metal roofing and commercial work. Acreage owners around Spruce Grove, Stony Plain, Sturgeon County, and Leduc County routinely put corrugated on the shop and pole barn while choosing a dressier profile for the house — and we can source both from the same mill in matching colours so the whole property reads as one property, not a collection of mismatched roofs. The same panels do double duty as metal siding and cladding on feature walls, wainscoting, and board-and-batten-style accents.

Every IronWrap corrugated roof uses virgin pre-finished steel — never re-rolled scrap — in your choice of a durable SMP or premium PVDF (Kynar 500) finish, over a heat-reflective synthetic underlayment, with closures and custom-bent flashings at every ridge, valley, eave, and sidewall so wind-driven Alberta rain and snow have nowhere to get in. It carries the same 50-year warranty stack and our own written installation guarantee as our premium systems. If you're weighing corrugated against the other metal profiles for a house rather than an outbuilding, our standing seam vs metal shingles vs tiles guide and the metal roof vs asphalt shingles cost breakdown are the best places to start.